Search
Close this search box.

Solutions

4U RACKMOUNT RUGGED COMPUTER

FS004217-00

Features

  • RUGGED 4U HIGH, 84HP WIDE (FOR 19” RACK-MOUNTING)

  • 240MM DEEP ENCLOSURE WITH COOLING FANS AND AIR FILTERS

  • 3U CPCI MONOLITHIC BACKPLANE WITH 7 CPCI SLOTS

  • 120W/100-220VAC, 50/60HZ (NOMINAL) INPUT POWER SUPPLY

  • SINGLE BOARD COMPUTER, INTEL I7 CPU, 4GB RAM

  • VGA PORT, TWO 10/100/1000 BASET ETHERNET PORTS, TWO USB FRONT PANEL PORTS AND ONE USB PORT VIA REAR CONNECTOR

  • MULTIMEDIA INTERFACE BOARD DVI-D PORT, SATA SOLID-STATE DISK (SSD), 10/100/1000BASET ETHERNET PORT

The above picture is for reference only.

Technical Data

  • CPU / Chipset

–   Intel Core i7 CPU
–   Intel Platform Controller Hub (PCH) Chipset

  • Memory
  • 4GB SDRAM system memory
         –   Soldered
         –   DDR3 with ECC support
         –   1066/1333/1600 MHz memory bus frequency
  • Graphics
  • Integrated in chipset
         –   650 MHz graphics base frequency
         –   1.2 GHz graphics maximum dynamic frequency
  • VGA connector at front panel
         –   One RGB and DVI-D connector
         –   Maximum resolution: 1600 x 1200 pixels 60Hz refresh rate
  • I/O
  • USB
         –   2 USB 2.0 ports via Series A connectors at front panel
         –   1 USB 2.0 port via rear I/O
  • Ethernet
        –   2 10/100/1000Base-T Ethernet channels at the front
         –   1 10/100/1000Base-T Ethernet channel via rear I/O
         –   RJ45 connectors at front panel 
  • Audio
        –   1 output
  • RS-422/485
         –   1 RS422/485 channel
         –   Optically isolated
         –   Shielded 9-pin D-Sub connector
  • Mass Storage
  • Serial ATA (SATA)
         –   1 port for onboard 2.5″ hard-disk drive / transfer rates up to 150MB/s (depends on hard disk) RAID level 0/1 support (depends on CPU board)
  • Solid State Disk (2.5″ SATA SSD)
         –   Samsung SSD 860 Pro MZ-76P256B (Storage Specifications upgrade) (It can be changed if the product is to be discontinued.)
  • Front Connections
  • 1 VGA
  • 1 DVI-D
  • 2 USB 2.0 (Series A)
  • 2 Ethernet (RJ45)
  • 1 Audio connection
  • 1 USB 2.0 (Series A) and Ethernet port via rearI/O
  • 1 RS-422/485 or RS-232
  • Systems & Card Cages
  • CompactPCI 19″ 4U/84HP rack-mount enclosure for 3U cards (vertical),
    Dimensions W x H x D = 482.6mm x 177.0mm x 240mm
    7 slot 3U CompactPCI backplane, prepared for rear I/O 1U fan tray with 2 fans
  • Power Supply
  • Wide input voltage ranges 100… 240VAC with power factor correction (PFC)
     Input voltage range of 100 to 240 VAC, Output power 120 W without derating
     Holdup time 20ms, Active power sharing, Inverse current protection,
     H15 rear connector, -40 to +85 °C with qualified components
  • Operating system
  • Microsoft Windows XP, 7, 10, Windows Embedded Standard 7

If you are interested in the FS004217-00,
Please contact us.

If you are Interested in the FS004217-00, Please contact us.

위로 스크롤