UART Interface
No. | Form Factor | Function | Connector Options | Miscellaneous Options |
---|---|---|---|---|
1 | 3U CompactPCI 4HP |
4 x isolated front panel RS-485 ports, Pericom PCI Express octal UART PI7C9X7958, 16C550 software compatible |
4 x RJ45, 3 x D-sub9 |
Option CompactPCI backplane connector J2 for rear I/O (4 x UART TTL level signals) |
2 | 3U CompactPCI 4HP |
4 x RJ45, 3 x D-sub9, 4 x D-sub9 (Ribbon flat) |
Option CompactPCI backplane connector J2 for rear I/O (4 x UART RX/TX CTS/RTS TTL level signals) |
|
3 | 3U CompactPCI Serial 4HP |
4 x isolated front panel RS-485 ports, Pericom PCI Express octal UART PI7C9X7958, 16C550 software compatible, On-board DIP-switches for full/half-duplex setting, and line termination on/off |
4 x Micro-D9, 3 x D-sub9, 8 x Micro-D9(8HP) |
Option CompactPCI Serial backplane connector P4 for rear I/O |
4 | 3U CompactPCI Serial 4HP |
4 x isolated front panel RS-232 ports, Pericom PCI Express octal UART PI7C9X7958, 16C550 software compatible |
4 x Rear I/O UART ports (TTL Level), wired to P4 for optional usage with RIO module |
|
5 | 3U CompactPCI Serial 4HP |
8 x Isolated RS-485 & RS-232 / Modular Design, Pericom PCI Express octal UART PI7C9X7958, 16C550 software compatible |
4 x RJ45 or Micro-D9, 8 x RJ45(8HP), 6 x D-sub9 (8HP) |
4 x Rear I/O UART ports (TTL Level), wired to P4 for optional usage with RIO module |
6 | 3U CompactPCI Serial 4HP |
8 x Isolated RS-485 & RS-232 by means of DIP-switches, Pericom PCI Express octal UART PI7C9X7958, 16C550 software compatible |
8 x Micro-D9 8 x RJ45(8HP) 6 x D-sub9 (8HP) |
Each UART port can be individually redirected to P3, P4 backplane connectors(TTL level) via DIP-switch configuration |