1 |
D210 |
|
MVB REPEATER SINGLE/REDUNDANT
Enables interoperability due to two galvanically isolated MVB nodes with EMD and ESD+, Two identical halves support functional redundancy, Allows for more than 32 nodes per MVB segment and increases cable length limits, Allows for logical MVB system to span several vehicles within fixed train set, 24V – 110V Power Supply Supported
|
2 |
D212 |
|
MVB STAR COUPLER
EMD, ESD+, OGF 5x (1x), 24-110Vdc, DIN Rail Mount |
3 |
D220C |
|
CAN REPEATER
Fully transparent for all higher layer protocols like CANopen or J1939, Baudrate up to 1Mbit/s, Galvanic separation 1kV, - 40°C to + 70°C operating temperature
|
4 |
D512 |
|
ETHERNET REPEATER
Completely transparent to all Ethernet protocols, Full or half duplex communication (restriction to 2 ports), Very low latency (<2us), Full 10Mbit or 100Mbit bandwidth (unlike “Ethernet extenders”), Customer specific port configurations for Auto Negotiation and Auto Crossing possible, Battery voltage input (up to 110V) eliminates the need for an external power supply, Can optionally also be powered from PoE, Power interruption class S2: No service needed thanks to design without electrolytic capacitor, Complies to IEC61375, EN50155, EN50121 and IEEE802.3 |
5 |
D650 |
|
PASSIVE ETHERNET TAP
Passive Ethernet terminal access point (TAP) with guaranteed non-retroactivity down to the physical layer, Monitors up to two 100 Mbit/s Ethernet network lines, Power-over-Ethernet (Powered Device) capable, - 40°C to + 70°C operating temperature |